• Cart€0.00
  • My Account
  • Cart
  • Terms & Conditions
  • Contact Us

Greentherm

  • Home
  • Store
  • What We Do
    • For Domestic Projects
    • For Commercial Projects
      • Solutions
      • Services
    • Greentherm Pricing and Specification Tools
      • Greentherm Heat Meter Specification Tool
      • Greentherm Custom Tank Specification Tool
  • What We Know
    • Efficiency Improvement
    • Solar Panels
      • Drainback Solar
      • Solar P.V.
      • Retrofit Solar
    • Heat Pumps
    • Ventilation
      • Heat Recovery
      • Demand Controlled Ventilation.
    • Underfloor Heating
    • Domestic Hot Water
    • Taxation and Allowances
    • Buffer tanks
    • Combi Cylinders
    • Tank In Tanks
    • Special Offers
    • F.A.Q.
  • Testimonials
  • News Section

Archive for category: Efficiency Improvement

  • Follow us on Twitter
  • Join our Facebook Group
  • RSS

Tank in Tanks, from Greentherm

in Buffer tanks, Combi Cylinders, Domestic Hot Water, Efficiency Improvement, Tank In Tanks / by Enda Ruxton
June 3, 2014

 It’s a Tank, inside a Tank

With conventional buffer stores, domestic hot water is provided either through a plate heat exchanger, or a coil tapping within the buffer store. The limitations of this should be clear. The temperature of the domestic hot water is limited by the ability of the heat exchanger to transfer heat from from the buffer water, through the coil. With a high draw-off, cold water may flow faster than it can be heated, you may end up with lukewarm water at the taps. Or, you need higher cylinder temperatures, and correspondingly higher fuel use.

A tank-in-tank cylinder (Also known as a combi-cylinder) is, just that. It’s a domestic hot water tank built inside the buffer store where it can be surrounded by the heating system water. This ensures continuous hot flow, no matter the demand, without requiring high system temperatures and excess fuel use.

Reducing your fuel use, reduces your energy bills.

Greentherm_Tank_in_Tanks_large

Greentherm Tank-in-Tank Cylinder Cutaway

A Greentherm Tank-in-Tank system saves you money.

Greentherm tank-in-tanks offer:

  • Generic Pricing for Custom Cylinders.
    All Greentherm cylinders are custom made to your exact specifications. We deal directly with the manufacturer, cutting out the middlemen to ensure you get exactly what you need, at a price that suits your budget.
  • 316L Stainless Steel Strength
    Domestic Hot Water tank manufactured from 316L Stainless Steel, for maximum resilience and corrosion resistance.
  • Rapid recovery of domestic hot water with reduced cylinder temperatures.
    Domestic Hot Water tank is surrounded by heating system water, ensuring a rapid recovery of domestic hot water temperatures.
  • Get the best out of your heating systems
    Allows multiple sources of heat to be combined into one store, capable of supplying both your central heating and domestic hot water ensuring no kilowatt-hour goes to waste. Operates at lower temperatures, for maximum efficiency.
  • Flexible installation
    All Greentherm tank-in-tanks feature six configurable tappings in 1″ BSP, along with a single dedicated solar coil, allowing you to use any combination of heat sources in the one installation. Compatible with heat pumps, solid fuel boilers, solar panels and conventional boilers.

Introductory Offer:

Call us now to avail of special introductory pricing for the month of June.

In Pod We Trust.

in Buffer tanks, Domestic Hot Water, Drainback Solar, Efficiency Improvement, Retrofit Solar, Solar Panels / by Enda Ruxton
May 14, 2014

Solar, Simplified with the Viridian Pod:

Viridian Pod, Solar Domestic Hot Water Preheat Buffer Tank.

One of the costliest and most time-consuming jobs in any solar thermal retrofit, is fitting a new solar cylinder. The old cylinder must first be removed and disposed of, with central heating and hot-water systems being disconnected, before a new cylinder is fitted, then plumbed into place. Not to mention the lost space in the Hot Press which is consumed by a large hot water tank.

The Viridian Pod is a game-changing new approach that simplifies installation work, saving you time and effort. And saving the Hot Press.

Why Pod?

Viridian Pod Cross Section

The Pod acts as a preheating buffer tank, supplying the existing domestic hot water cylinder in the home. Therefore:

  • Plug and Play Technology
    Compatible with both Drainback and Pressurised Solar Panels. Pump station and controller integrated into one package. No unnecessary wiring. No time consuming plumbing work. It just Works.
  • Discrete space saving design
    Horizontal design. Can be fitted into any attic or crawlspace. Can be located directly beneath the panels for maximum installation convenience.
  • Fewer connections required. Robustness built in.
    No need to disassemble and rebuild the existing plumbing system to fit a new solar cylinder. Reduced potential for leaks requiring repairs and costly call backs, saving time.
  • Compatible with any heating system.
    Preheated water can be supplied either to an existing domestic hot water cylinder or to a combi-boiler, simplifying system design. Custom designed systems are not required.
  • Greentherm Recommends Viridian Clearline Solar Panels.
    Greentherm recommends matching Viridian Clearline Solar Panels with your Pod, for maximum compatibility and ease of installation.
  • Special Introductory offer.
    Call now, at 01 5314781 to avail of introductory pricing on full system kits, and individual Pod systems.

 

With Exsiting Cylinder

Existing Cylinder

Viridian Pod with Combi-Boiler

Combi-Boiler

The Viridian Pod saves you Time.

  • Time designing.
  • Time installing.
  • Time commissioning.
  • Time on maintenance and repair.

 

Contact us now for sales and technical inquiries.

Zypho Heat Recovery

in Efficiency Improvement, Heat Recovery / by Enda Ruxton
May 13, 2014

Heat is Money. Stop Pouring money down the drain!

Using patented heat recovery technology, the Zypho extracts heat from shower waste-water, and uses it to preheat the cold supply into the shower’s mixing valve. This ensures the valve only needs to blend in the minimal amount of valuable hot water to achieve a comfortable temperature. Zypho can also be used to preheat the cold water supply to an electric shower*.

Reducing the need for hot water, reduces heating bills, saving money.

 

Zypho_Unit_Cropped

Reduce your energy costs by One Third.

 From a cold water feed temperature of 10°C, Zypho is capable of raising the temperature of the supplied water by up to 12°C. With a cold supply at 10°C and a comfortable shower temperature of 38°C, preheating the supplied water to 22°C using Zypho can reduce the energy requirements of a shower by up to 33%.

At the bottom line, this translates to a direct energy cost reduction of One Third, each and every time the shower is used.

Zypho_Connections

 

Greentherm_Zypho

 

Cost effective energy savings.

Zypho is one of the most cost-efficient energy upgrades that can be made to a home. It can be seamlessly integrated as part of a new-build specification, or rapidly retrofitted to an existing plumbing system. In a typical home, payback can easily be achieved within two to four years.

Zypho is compatible with the vast majority of conventional hot-water fed showers.

Click Here to order Zypho. Call us now, at 01 5314781 for sales and technical inquiries. For more information on Zypho, Contact Us

* Compatibility with electric showers must be checked with the manufacturer before installation. Systems will normally be compatible if they can accept a maximum inlet temperature of 28°.

Page 2 of 212

Categories

  • Buffer tanks
  • Combi Cylinders
  • Demand Controlled Ventilation.
  • Domestic Hot Water
  • Drainback Solar
  • Efficiency Improvement
  • F.A.Q.
  • Heat Pumps
  • Heat Recovery
  • News
  • Retrofit Solar
  • Solar P.V.
  • Solar Panels
  • Special Offers
  • Tank In Tanks
  • Taxation and Allowances
  • Underfloor Heating
  • Ventilation

Welcome to Greentherm!

GreenTherm is a professional provider of products and services that offers many different types of cost effective renewable energy solutions for domestic and commercial buildings. See all of our products in the store and don't forget to contact about our great trade discount!

Top Products

  • Heatmiser NeoHub €180.00
  • Heatmiser NeoStat €91.00
  • Heatmiser Wiring Center €96.00 – €157.00

Like us on Facebook

Facebook

Login

Log In
Register Lost Password

Cart

© Copyright - Greentherm - Wordpress Theme by Kriesi.at
  • Send us Mail
  • Follow us on Twitter
  • Join our Facebook Group
  • Subscribe to our RSS Feed