Floore Underfloor Heating
Suitable for suspended floors, wall and ceiling mounting
Starting at 13 mm The floor level doesn’t need to be raised by more than 13 mm! Available in 13, 17, 25 & 50mm thickness options
All in one-panel
Consist of a panels with straight and return channel in the same panel. This makes it very easy with installation, sales and stock keeping.
New channels
To use the return channels you just need to cut the foil in the U-turns that will be used. Press the foil into the channels using the back of the knife. It´s very easy to cut new channels locally by using a craft knife or electric router.
~Will this text change?
Cutting the panels
It is very easy to cut the panels to suitable length. All you need is a straight ruler and a Stanley knife (craft knife).
Ceramic tiles directly onto the system
For over 20 years ceramic tiles has been laid directly onto Flooré panels! This is unique and works perfect as long as you use products that has been tested and approved with Flooré panels. For bathroom wet areas, suitable renovation screed and moisture barrier have to be applied above the panel prior to setting the tiles.
Flooring material
Flooré panels can be used underneath all types of flooring material. Wood, parquet or laminate can be set floating. Detailed information is available in our installation manuals.
Patented panels
The concept is based on thin panels made of high density polystyrene covered with aluminium foil. This design makes it possible to lay the flooring material directly on top of the panels. The panels emit heat more rapidly and efficiently than traditional embedded systems because the distance between the pipe and floor surface is shorter and have lower thermal mass.
Customised solutions
The flexible and fully automated manufacturing enables production of many different types of panels. We can easily change raw materials, distance between pipes and pipe dimension. The products can be customized exactly as per customer requirements.
Can be installed on all surfaces
Flooré panels can be installed over most existing floors without any need to dig up the old floor. There is no need for expensive and time consuming screeds. You can even set your new floor on top of the old one.
For walls and ceiling
Installation is possible radiant heating systems in floors, walls and ceiling.
Pipe dimensions
The panels can be used for PEX, PE-RT or Multilayer pipes, our standard production is for 12, 14 and 16 mm pipes. But we also have special OEM-products for 17 and 20 mm pipes. If there is a request we are always willing to see if it is possible to customize a product to meet the demand.
Superior design software
Together with the panels comes a design program that has been developed over the last 20 years.
